Base

Quick and easy

Due to the high stability of the form, you will be able to mount the X-Shut “Basis” with only five screws on almost any surface (e.g. protective helmets).

The “Riegel” can be controlled in different ways – using the unlocking release cord, the slide knob or by turning like when using this anti-theft system.

“Basis” – on the hand

Mobile and flexible

Due to this practical “Handhalterung”, devices or objects can easily be mounted on the back of your hand, without reducing flexibility.

The “Handhalterung” can be adapted to all different sizes and guaranties a perfect comfort to both hands.

Your advantages

• You can optionally use your device for portable or fixed use.
• Very flat and solid construction.

“Basis” - on round profiles

Everywhere

Two stainless steel pins, mounted on the bottom side of the “Basis” enable a quick and easy mounting on all round profiles.

The “Basis” can be mounted using commercial cable ties or metal hose clips.

“Basis” – fastening devices

Special fixing devices
“Konterscheibe Basis”		Big flat washer with 5 press nuts. Material: aluminium, anodized Advantage: optimal distribution of forces
“Fixierstifte Basis”		Appropriate to mount on round profiles (round profiles with a diameter between 15mm and 60mm). Material: stainless steel
“ Ausgleichscheibe Basis ”		For mounting on bellied surfaces (e.g. safety helmets). Material: 3 mm foam rubber Advantage: even surface, optimum distribution of forces
“Handhalterung”		Plastic shell with aluminium bridge on the bottom side. Advantage: very comfortable due to the continuous belt strap.
„ Kunststoffschale Basis “		Protects the Basis against damage and serves as an insulator. Total height 7mm Maximum diameter: 52 mm
" Integrations Kitt "		"Retaining plate" and „Washer Basis", for integration with a profile thickness less than 3,5mm. Material: Aluminium, anodized Advantage: very solid and comfortable attachment.

Standardized fastening devices
		Suitability of material	recommendation of attachment
Countersunk bolt M3		Metal Plastic Carbon Textiles	In thin profiles, drill five holes with a diameter of 3,3mm. Bottom side profile: „Washer Basis“ Upper side profile: „Basis“
			Thick profiles can be equipped with an M3 internal thread.
Sheet metal screws		metal sheet	Drill five screw holes: Diameter 2,3mm
Wood screws		Wood Plastic	The screws can directly be screwed into thicker wood and plastic.